Getting Started 1-3
Installing Battery Packs and Connecting to AC Power
The tablet computer operates either on the external AC power or internal
battery power. It is suggested that you use AC power when you start up
the tablet computer for the first time.
CAUTION: Use only the AC adapter included with your tablet computer. Using other
AC adapters may damage the tablet computer.
1. Fit the two battery packs into place on both sides.
2. Remove the rubber cap from the included stylus to expose a Phillips
screwdriver, or use a small #1 Phillips head screwdriver to secure the
two screws on each battery taking care not to over tighten.
3. Plug the DC cord of the AC adapter into the power connector ( )
of the tablet computer (
).
To Next Page
Loading...
Need help?
General
