Trimble Yuma - Exit Menu

Using BIOS Setup and System Utility 5-15
Exit Menu
The Exit menu displays ways of exiting BIOS Setup Utility. After you are
finished modifying your settings, you must save and exit so that the
changes can take effect.
Exit Saving Changes saves the changes you have made and exits BIOS
Setup Utility.
Exit Discarding Changes exits BIOS Setup Utility without saving the
changes you have made.
Load Setup Defaults loads the factory default values for all the items.
Discard Changes restores the previous values for all the items.
Save Changes saves the changes you have made.