7-6 Troubleshooting
Transmission quality is poor.
Your tablet computer may be in an out-of-range situation. Move your
tablet computer closer to the Access Point or another wireless LAN
device it is associated with.
Check to see if there are interferences in the surrounding
environment. These could include microwave ovens, cordless
telephones, wireless video cameras, medical equipment, and large
metal objects. See the next item for solving radio interference
problems.
Radio interference exists.
Move your tablet computer away from the device causing the radio
interference such as microwave oven and large metal objects.
Plug your tablet computer into an outlet on a different branch circuit
from that used by the affecting device.
Consult your dealer or an experienced radio technician for help.
I cannot connect to another wireless LAN device.
Make sure that the wireless LAN feature is turned on.
Make sure that the SSID setting is the same for every wireless LAN
device in the network.
Your tablet computer is not recognizing changes. Restart the tablet
computer.
Make sure that the IP address or subnet mask setting is correct.
I cannot communicate with the tablet computer in the network when
Infrastructure mode is configured.
Make sure that the Access Point your tablet computer is associated
with is powered on and all the LEDs are working properly.
If the operating radio channel is in poor quality, change the Access
Point and all the wireless station(s) within the BSSID to another radio
channel.
Your tablet computer may be in an out-of-range situation. Move your
tablet computer closer to the Access Point it is associated with.
To Next Page
Loading...