Troubleshooting 7-7
Make sure that your tablet computer is configured with the same
security option (encryption) as the Access Point.
Use the Web Manager/Telnet of the Access Point to check whether it
is connected to the network.
Reconfigure and reset the Access Point.
I cannot access the network.
Make sure that the network configuration is appropriate.
Make sure that the user name or password is correct.
You have moved out of range of the network.
Turn off power management.
Power Management Problems
The tablet computer does not enter Sleep or Hibernation mode
automatically.
If you have a connection to another computer, the tablet computer
does not enter Sleep or Hibernation mode if the connection is actively
in use.
Make sure that the Sleep or Hibernation time-out is enabled.
The tablet computer does not enter Sleep or Hibernation mode
immediately.
If the tablet computer is performing an operation, it normally waits
for the operation to finish.
The tablet computer does not resume from Sleep or Hibernation
mode.
The tablet computer automatically enters Sleep or Hibernation mode
when the battery pack is empty. Do any one of the following:
Connect the AC adapter to the tablet computer.
Replace the empty battery pack with a fully charged one.
To Next Page
Loading...