7-8 Troubleshooting
Software Problems
An application program does not work correctly.
Make sure that the software is correctly installed.
If an error message appears on the screen, consult the software
program’s documentation for further information.
If you are sure the operation has stopped, reset the tablet computer.
(See ―Resetting the Tablet Computer‖ later in this chapter.)
Sound Problems
No sound is produced.
Make sure that the volume control is not set too low. Increase the
volume by pressing the F2 button for more than 2 seconds, then press
the cursor-control button’s UP arrow.
Make sure that the tablet computer is not in Sleep mode.
If using an external speaker, make sure that the speaker is properly
connected.
Distorted sound is produced.
Make sure that the volume control is not set too high or too low. In
most cases, a high setting can cause the audio electronics to distort
the sound.
The external audio device does not work.
Make sure that your tablet computer is equipped with the driver
needed.
Tap the speaker symbol on the taskbar and check the Windows
volume control.
Check the volume control of your tablet computer.
To Next Page
Loading...