7-10 Troubleshooting
Resetting the Tablet Computer
You may have to reset (reboot) your tablet computer on some occasions
when an error occurs and the program you are using hangs up.
If the tablet computer operation seems to hang up, first wait. It is possible
that the tablet computer is processing data. Periodically check the hard
disk drive in-use indicator. If it flashes irregularly, the program may be
accessing data and preventing you from using the keypad. If you are sure
the operation has stopped and you cannot use the ―restart‖ function of the
operating system, reset the tablet computer.
You can reset the tablet computer by pressing F1 + Enter on your tablet
computer. If this does not work, turn off the tablet computer with the power
button. Wait for at least five seconds and turn it on again.
CAUTION: Resetting will cause any unsaved data to be lost.
To Next Page
Loading...