Troubleshooting 7-11
Warning Messages
G-Camera Application
Unable to scan the GPS COM
port.
G-Camera will scan the GPS COM port for GPS
Information or Tracking. This message will
appear when auto-scan GPS COM port has
failed.
The available disk space is not
enough, please change to another
disk.
This message will appear when the storage space
where video and photos are saved is not enough.
The available disk space is not
enough or the folder has been
removed and does not exist.
Please change to another disk.
This message will appear when the space is not
enough or the folder which is set for saving the
file was removed.
The system is currently tracking
the GPS route. Do you really want
to exit?
When tracking the path or saving the KML file
and the user taps X to exit, this message will
appear.
The camcorder is currently
performing an operation. Do you
really want to exit?
When recording or saving the video and the user
taps X to exit, this message will appear.
The camera is currently
performing an operation. Do you
really want to exit?
After pressing the shutter button, the counter is
counting down, taking pictures continuously, or
saving the photo. At this time, the user taps X to
exit. This message will appear.
Unable to locate the front camera
device or it does not exist!
G-Camera application will scan the camera. If the
device is not found, this message will appear.
Unable to locate the rear camera
device or it does not exist!
G-Camera application will scan the camera. If the
device is not found, this message will appear.
G-Camera is used by other users.
Please close G-Camera from
other user; otherwise, function
cannot be properly performed.
G-Camera application can only be used by a
single user. If the second user wants to use the
camera, the other user needs to close the
G-Camera application.
Press the Start Tracking button to
start recording KML file.
This message will appear when entering Path
Logger mode.
To Next Page
Loading...