Need help?Do you have a question about the TRIMETALS GUARDIAN D63 and is the answer not in the manual?
Comprehensive list and visual identification of all shed components.
List of necessary tools for assembling the Guardian D63 shed.
Key measurements for the Guardian D63 shed, including height, width, and depth.
Step 1: Securing the metal base to ensure a level assembly site.
Step 2: Attaching the left and right side panels to the metal base.
Step 3: Combining the large back panel with the left side panel.
Step 4: Fastening the large back panel to the metal base.
Step 5: Attaching the small back panel to the large back panel.
Step 6: Connecting the right side panel and securing the back panels to the base.
Step 7: Fitting the structural beam and central shelf support.
Step 8: Placing and securing the roof panel onto the shed structure.
Step 9: Inserting shelf brackets and placing shelves into the shed.
Step 10: Fitting the lock mechanism and door guides.
Step 11: Mounting the left and right sliding doors into the tracks.
Step 12: Adding decorative and protective bolt covers to external fixings.
Step 13: Optional step for securing the shed to a wall for stability.
Step 14: Optional step for anchoring the shed base to the ground.
Step 15: Verifying shed squareness and ensuring level installation.
To Next Page
General