STORAGE
• Check unit before storage tobe sure the equipment is
in safe working condition.
• Stop the engine or motor.
• Store the unit indoors, in a dry and locked place, out of
the reach of children.
• Maintain or replace safety and instruction labels, as
necessary.
For gas powerhead units:
• Allow the unit to cool before storing in any enclosure.
• Drain fuel from unit. Never store the unit with fuel in the
fuel tank inside a building where ignition sources are
present such as hot water and space heaters, clothes
dryers, etc.
TRANSPORTING
• Allow the unit to cool before transporting.
• Secure the unit while transporting.
For gas powerhead units:
• Drain fuel from unit.
• Tighten fuel cap before transporting.
ACCESSORIES/REPLACEMENT PARTS
Tine Assembly (Left Outer and Right Inner) . .791-182729
Tine Assembly (Left Inner and Right Outer) . .791-182730
Tine Fastener Assembly ................. 791-147473
Use only original MTD replacement parts.
10
To Next Page
Loading...
