Need help?Do you have a question about the Triner Scale TS-700 MS and is the answer not in the manual?
General| Model | TS-700 MS |
|---|---|
| Category | Measuring Instruments |
| Type | Bench Scale |
| Display | LCD |
| Material | Stainless Steel |
| Power | AC Adapter or Battery |
| Units | kg |
Lists key technical specifications like resolution, ADC, stability, voltage, power, temperature, and humidity.
Describes the purpose of each function key such as Hold, Total, Kg/lb, Gross/Tare, Zero, and Print.
Explains the operation of each key (On/Off, Hold, Total, Kg/lb, Gross, Tare, Zero, Print) on the TS-700 MS indicator.
Details the indicator's capacity for load cells, wire configurations, excitation voltage, and maximum output current.
Explains the RS232 connector for peripherals and PC connection, including pinouts and necessary PC software.
Provides instructions on how to enter parameter settings mode and adjust values using the indicator's keys.
Details various parameters (C08-C39) affecting indicator functions like power, display, communication, and calibration.
Describes the bit configurations for the remote display format, including State A, State B, and State C.
Explains the PC computer continuous sending format, detailing data structure and fields like weight status and mode.
Lists ASCII commands for serial interface reception, including command words and their functions for data control.
Provides a list of error codes, their common causes, and recommended solutions for troubleshooting the indicator.
Lists the default settings for various parameters (C01-C22), providing a reference for initial configuration or reset.
To Next Page