INSTALLATION INSTRUCTIONS – On Wire Rack
STEP 3
With a Phillips screwdriver, secure SLIDES (B) & (C) to wire shelf by putting
PLATE SCREWS (E) through slots and fasten to RACK PLATES (D).
STEP 4
Attach LOWER DRAWER (A) to clips on LEFT and RIGHT SLIDES (B) & (C) until the wire on LOWER
DRAWER (A) clicks into the clips.
Installation Suggestion: With LOWER DRAWER (A) resting on top of the CLIPS, brace the top of LOWER
DRAWER (A) with one hand and, with a rubber mallet, lightly tap each bottom corner of the CLIPS to
secure LOWER DRAWER (A) into the CLIPS.
5
© 2023 TRINITY - 800.985.5506
To Next Page
Loading...
Need help?
General
