Trinity TBFLNA-1406 User Manual

ASSEMBLY INSTRUCTIONS
Screw (2) CONNECTOR SCREWS (JJ) to
RIGHT SIDE FRAME (C) as shown with
the SCREWDRIVER (II). Insert (2) CAM
LOCKS (KK) to BACK FRAME (F).
Push BACK FRAME (F) with CAM
LOCKS (KK) onto the CONNECTOR
SCREWS (JJ).
Use SCREWDRIVER (II) to turn CAM
LOCKS (KK) in clockwise direction until
BACK FRAME (F) is pulled tight with
RIGHT SIDE FRAME (C).
STEP 3
Insert (4) DOWELS (CC) in the LEFT SIDE FRAME
(B). Place (2) on each cross beam as shown.
Screw (2) CONNECTOR SCREWS (JJ) to LEFT SIDE
FRAME (B) as shown with the SCREWDRIVER (II).
Insert (2) CAM LOCKS (KK) to BACK FRAME (F)
with pointer arrow pointing toward the edge.
Take LEFT SIDE FRAME (B) and align
CONNECTOR SCREWS (JJ) to holes in BACK
FRAME (F), then DOWELS (CC) to UPPER SHELF
(D), then LOWER SHELF (E).
Use the SCREWDRIVER (II) to turn CAM LOCKS
(KK) in clockwise direction until BACK FRAME (F)
is pulled tight with LEFT SIDE FRAME (B).
Insert (6) SCREWS (AA) through cross beams of
LEFT SIDE FRAME (B) and fasten tightly to
UPPER SHELF (D) and LOWER SHELF (E) with
SCREWDRIVER (II).
STEP 4
© 2017 TRINITY - 800.985.5506
4
KK (2)
F (1)
AA (6) CC (4) II (1)
B (1)
JJ
F
AA
JJ
B
II
E
D
F
C
JJ (2)
II (1)
KK
CC
KK
KK (2)
JJ (2)
Holes on
this side.

Trinity TBFLNA-1406 Specifications

General

Brand	Trinity
Model	TBFLNA-1406
Category	Food Prep Table
Language	English