Need help?Do you have a question about the Trio JR-500S and is the answer not in the manual?
Achieved via crystal controlled first local oscillator and VFO type 2nd oscillator.
Selects and amplifies weak radio signals, improves S/N and image rejection.
Converts 1st IF to 455 kHz; features a stable, transistorized VFO with output terminals.
Provides automatic gain control using rectified IF output as negative bias.
Controls receiver modes (OFF, SSB-CW, STAND BY, AM, AM-ANL).
Adjusts the audio output volume level.
Controls receiver sensitivity, used for overload situations.
Main tuning knob for selecting frequencies, with 1 kHz precision.
Steps for setting FUNCTION, BAND, RF GAIN, AF GAIN, PRE SELECTOR, and TUNING for reception.
Achieved via crystal controlled first local oscillator and VFO type 2nd oscillator.
Selects and amplifies weak radio signals, improves S/N and image rejection.
Converts 1st IF to 455 kHz; features a stable, transistorized VFO with output terminals.
Provides automatic gain control using rectified IF output as negative bias.
Controls receiver modes (OFF, SSB-CW, STAND BY, AM, AM-ANL).
Adjusts the audio output volume level.
Controls receiver sensitivity, used for overload situations.
Main tuning knob for selecting frequencies, with 1 kHz precision.
Steps for setting FUNCTION, BAND, RF GAIN, AF GAIN, PRE SELECTOR, and TUNING for reception.
To Next Page
General
