Triomph ETF1980 - Battery and Power; Scale Operation Guide

GB
BATTERY
1XCR2032 lithium batery
(INCLUDE)
TO REPLACE BATTERY
Remove battery compartment cover and attach new
battery onto the battery sanaps.Please take note to the
polarity.
TO OPERATE SCALE
1.Please out the scale on a hard and flat surface.
2.Place bowl(if used) on the scale before turning on the
unit.
3.Press and release ON/ZERO button to turn on the
unit.
4.Wait until display prompts to “0g” before starting
weighing.
TO CONVERT WEITHT UNITS
Press the button “UNIT” to convert between “g” and
“oz”
“ZERO” or “TARE” function
To weigh different loads consecutively without
removing loads from the scale.Put first load on the
scale,get weith reading.Press ON-ZERO to reset the
LCD reading to “0” before adding next load.You can
repeat operation.
4