Need help?Do you have a question about the Triple-IN PS300-90 and is the answer not in the manual?
Overview of Triple-Ins PS Laser Scanners for various applications.
Details the scope and version of the PSxxx-90 Laser Scanner User's Manual.
Information on obtaining the latest documents and firmware from the Triple-IN webserver.
Identifies and explains the function of the various physical components of the PSxxx-90 Laser Scanner.
Lists and describes the internal system parts and their functions within the PSxxx-90 Laser Scanner.
Explains the Time-of-Flight (ToF) technology and Triple-IN's KEM method used by the laser scanners.
Details the origin point and the 90° scan field configuration of the PSxxx-90 Laser Scanners.
Describes the special PS100-90-HT version designed for high temperature operating conditions.
Provides essential guidelines for safely handling and installing the PS Laser Scanners.
Instructions on using original packaging for safe transport and handling of the sensor.
Details on how to physically mount the PSxxx-90 Laser Sensors using screws and torque specifications.
Explains the procedure for connecting and securing the PS Laser Scanners using SPEEDCON M12 connectors.
Details the M12 connector for data and Power over Ethernet (PoE) connectivity and its pin assignments.
Describes the M12 serial interface connector, its wiring, and power-related connections.
Introduces software tools like TeraTerm and TCP/IP Manager for scanner configuration and operation.
Steps and indicators for powering up the PS Laser Scanner and its self-test sequence.
Covers RS232 communication setup, terminal mode entry, and binary command interface for scanner control.
Explains network settings, IP configuration via RS232 or PSControlProgram, and Ethernet connection details.
Outlines methods for configuring the PS Laser Scanner using parameters and provides a table of user parameters.
Details how to set up scan modes and perform scans using the Terminal Mode and PSControlProgram.
Explains how to use filters like near-field suppression and select master echo settings for accurate measurements.
Describes how to configure digital outputs for scan synchronization, status signals, or as preset counters.
Explains how to configure the optional internal heater's ON/OFF thresholds based on temperature.
Details how to enable and read data from an optional external incremental encoder for horizontal position.
Instructions on how to clean the PS Laser Scanner, focusing on the front window and body.
Guide on updating the firmware for the MPU and Communication boards using XMODEM protocol.
Explains the meaning and status of the Green, Yellow, and Red LEDs on the PS Laser Scanner.
Describes self-test results, system health bits, and common warnings/errors reported by the scanner.
Comprehensive technical data including working range, accuracy, spot properties, and operational modes.
Technical specifications and working range for the HT (High Temperature) versions of the PSxxx-90 scanners.
Graphical representation of laser spot size and sigma values over distance for different models.
Visual diagrams illustrating the laser spot patterns in Normal and Fast scan modes.
Information on the availability of a 3D CAD model for the PS Laser Scanner outlines.
Provides detailed dimensional drawings and outlines of the PSxxx-90 Laser Scanner.
Diagrams and pin assignments for the serial multifunction cable used with the scanner.
Illustrates the Ethernet and Power over Ethernet (PoE) cable connections and pin configurations.
A list of all figures and their corresponding page numbers within the document.
Records changes and update history for the PSxxx-90 Laser Scanner User's Manual.
To Next Page
General