10
True Trace Response Time:
500 milliseconds max at 100 Ohms or less
1 second max at 10K Ohms
True Trace Threshold: 10K Ohms or less
Internal Settings:
Warble or Continuous Tracer Tone
Hi or Lo Pitch Tracer Tone
Pilot Tone On or Off
True Trace On or Off
Protection: Tolerates momentary 120VAC Line Cross
without damage.
5.1.4: Connections:
RJ-45 Jack for connection to LAN cable
RJ-45 to RJ-11 Adaptor Cable for connection to phone line
Color Coded Alligator Clips for connection to stripped wires
or terminals
RJ-11 Plug for connection to Wireless Telephone
5.1.5: Wireless Telephone Interface:
Tracer Tone signal is applied to RJ-11 plug for connection to
wireless phone base station. Level is approx. -20dBm when
connected to the base station. Loop current is not supplied.
Protection: Tolerates momentary 120VAC Line Cross with-
out damage.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General