EasyManuals Logo

Triplett Fox & Hound User Manual

Triplett Fox & Hound
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
5: Specifications
5.1: FOX 2 Specifications
5.1.1: Telephone Line Polarity Test:
Indication: Red and Green LEDs light for Normal and
Reversed polarity
Load: Approx. 13mA at 50VDC (usually less than off-hook
recognition current)
Protection: Tolerates momentary 120VAC Line Cross
without damage.
5.1.2: Telephone Line Ringer and Visual Ring Indication:
Indication: Red and Green LEDs light simultaneously,
Beeper sounds
Protection: Tolerates momentary 120VAC Line Cross
without damage.
5.1.3: Tracer Tone (with fresh battery):
Waveform: Differentiated Square Wave
Level: Approx. 12Vpp (+5dBu, 600 Ohm) into an open
circuit (unterminated cable or telephone line)
Approx. 4Vpp (-20dBm) into a 600 Ohm load
(terminated telephone line)
Frequencies: 4 frequencies located between 600Hz and
2000Hz, depending on user setting
Types: Warble, Continuous, Pulse
Audio: Low level pilot tone verifies tracer tone is active
True Trace Cadence: Slow - approx 2Hz
Fast - approx 7Hz
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triplett Fox & Hound and is the answer not in the manual?

Triplett Fox & Hound Specifications

General IconGeneral
BrandTriplett
ModelFox & Hound
CategoryRecording Equipment
LanguageEnglish