13
The FOX Jr’s warbling signal should be heard
coming from the HOUND Jr. Adjust the
thumbwheel on the FOX Jr while listening to the
HOUND Jr. Notice how some pitches of the
sound are louder than others. In use, the user
will usually adjust the FOX Jr to one of the louder
pitches, so the HOUND Jr will be easier to hear
while tracing wires.
With the FOX Jr adjusted to one of the louder
pitches, experimentally position the tip of the
HOUND Jr in different locations around the leads
of the FOX Jr, noting how the loudness of the
HOUND Jr, and the brightness of the signal
strength LEDs, increase as the leads are ap-
proached. Adjust the thumbwheel on the
HOUND Jr to reduce its loudness when the
HOUND’s tip is right against one of the FOX’s
leads.
The HOUND Jr’s earphone jack accepts a stan-
dard 1/8" (3.5mm) mini-plug. This type is often
used with portable music playing devices. The
To Next Page
Loading...
Need help?
General
