Need help?Do you have a question about the Triplett 310 and is the answer not in the manual?
General| Type | Analog Multimeter |
|---|---|
| Accuracy | ±3% of full scale |
| Battery Test | Yes |
| Display Type | Analog |
| Battery Type | 1.5V (AA) |
| Input Impedance | 20kΩ/V |
| Dimensions | 5.25 x 3.75 x 1.75 in (133 x 95 x 44 mm) |
Read all instructions, test meter functionality, respect voltage limits, avoid children, use caution with capacitors, and handle wet conditions.
Proper lead insertion, avoid magnetic/electrostatic/RF fields, do not touch live circuits, check for damage, and handle in moderate temperatures.
Emphasizes reading the manual, performing safety checks, not touching exposed wiring, turning off power, and awareness of high energy circuits.
Details ranges, sensitivity (ohms per volt), and accuracy for DC and AC voltage measurements.
Covers resistance ranges, accuracy, and maximum voltage/current/power for ohmmeter operation.
Specifies DC current ranges, accuracy, voltage drop, meter characteristics, and overload protection.
Lists battery types, fuse rating, weight, and included accessories like test leads and manual.
Locates controls and provides instructions for checking and using test leads, including safety for high voltage.
Advises on starting with the highest range and choosing ranges for accurate readings on the scale.
Explains polarity selection (310-C), changing settings safely, and performing zero adjustment for the meter.
Discusses factors affecting readings and provides instructions on handling the instrument with care.
Step-by-step guide for measuring DC voltages up to 300V, including lead insertion and range selection.
Procedure for measuring DC voltages up to 1200V, noting the 310-C limit and safety warnings.
Instructions for measuring AC voltages up to 300V, including range setting and reading the scale.
Procedure for measuring AC voltages up to 1200V, with specific notes for the 310-C model.
Steps for measuring resistance, including probe shorting, zero adjustment, and reading values with multipliers.
Procedure for measuring DC current, involving series connection, range selection, and reading the scale.
Explains how to measure output voltage using AC voltage procedure and convert readings to dB using a chart.
Illustrates and lists various carrying cases available for the VOM models.
Lists different types of test leads available, including their lengths and connector types.
Guidelines for replacing batteries based on ohmmeter range performance issues.
Instructions on how to replace the fuse if ohmmeter ranges do not function.
Procedure for cleaning the meter's plastic window and cautions regarding solvents.
To Next Page
