28
Calibration
With normal use, readjustment of this VOM should
not be necessary. An occasional check of the VOM
against a known reference voltage or another VOM is
good practice. If there is a question about the accu-
racy of the VOM, it should be returned to the factory
or an authorized service center for a calibration check.
TRIPLETT PRODUCT RETURN INSTRUCTIONS
In the unlikely event that you must return your
Triplett equipment for repair, the following
steps must be taken.
1) Call 1-800-TRIPLETT to obtain a Return Material
Authorization (RMA) number from Customer Service.
2) Enclose a copy of the original sales receipt
showing date of purchase.
3) Clearly print the RMA number on the outside of the
shipping container.
4) Return to: Triplett
850 Perimeter Road
Manchester, NH 03103
ATTN: Repair Dept.
Be sure to include a full description of the problem, and a tele-
phone number, st
reet address, or email address, where you
can be contacted, and a return address where the meter can be
shipped to upon repair.
To Next Page
Loading...
