Tripp Lite B004-DUA4-K-R User Manual

4
Notes: Before you begin, power off all devices that you will be connecting
to the KVM switch. You must also unplug the power cords of any computers
that have the Keyboard Power On feature. There is a 3.5mm port on the
front of the B004-DUA4-K-R for use with an optional wired remote control.
1.ConnecttheexternalpowersupplytotheKVM,andthenplugitinto
aTrippLiteSurgeSuppressor,UninterruptiblePowerSupply(UPS),or
PowerDistributionUnit(PDU).
2.ConnectyourUSBkeyboardandmousetothetwoUSBportsontheleftof
theKVMswitch.(ThetwoUSBportsontherightareforperipheraldevices.)
3.Connectamicrophoneandspeakerstothecorresponding3.5mm
stereoports.
4.ConnectyourDVImonitortotheDVIconsoleportontheKVM.
Note: If you are connecting to a VGA monitor, use Tripp Lite’s DVI to
VGA adapter cable, model P556-006
5.IfyouareconnectingUSBperipherals,plugthemintothetwoUSB2.0
portsontheright.(ThetwoUSBportsontheleftarefortheshared
keyboardandmouse.)TheB004-DUA4-K-Rincludesanadditionaltwo
USB2.0peripheralportsonthefrontoftheunit.
6.UsingtheincludedDVI+AudioKVMcablekitsandUSBA/Bcables,
connectthecomputerportsontheKVMtoacomputer.
Note: If you are connecting to a computer with a DVI-D port, use a
Tripp Lite DVI-I to DVI-D adapter, model P118-000.
7.Powerontheconnectedcomputersanddevices.
Installation
201107247 93-3129.indd 4 9/9/2011 2:33:29 PM

Tripp Lite B004-DUA4-K-R Specifications

General

Brand	Tripp Lite
Model	B004-DUA4-K-R
Category	Switch
Language	English