4
Panel Descriptions
Front Panel
1
Power – Press to turn the unit on and off.
2
Power Indicator – Illuminates red to signal the DC power supply is
connected to an outlet and the KVM switch is turned on.
3
Input Selector – Illuminates blue to indicate whether PC1, PC2, PC3
or PC4 has been selected. Select LEDs flash in a loop during automatic
switching mode. Online LEDs illuminate when the corresponding USB-B
port is connected.
4
IR EXT – Connect the included IR Extender for IR signal reception from
the included IR Remote Control.
5
IR – Signal reception point for the IR Remote Control.
6
3.5 mm Microphone – Connect a microphone.
7
3.5 mm Stereo – Connect a stereo audio device.
8
USB-A 3.0 – Connect USB peripherals (printers, scanners, U-disks,
etc.).
1 2 4 5 6 73 8
To Next Page
Loading...
Need help?
General
