1
Owner’s Manual
1U Rackmount Console
(for KVM Switch or Server)
Model:
B021-000-19-HD2
Series No:
AGCB6533
Package Contents
Features
• Rackmount console (LCD monitor, keyboard, touchpad) in an integrated 1U rackmountable housing
• Sleep mode when the monitor cover is closed
• Rackmountable in EIA-standard 19-inch rack (1U)
• Includes rackmount brackets
• Supports resolutions up to 1920 x 1080
• Includes a USB 2.0 pass-through port, which can be used to provide easy access to a USB port on a connected device
(KVM switch or computer)
• Includes a DVI-I port for connecting to a DVI or VGA* server or KVM switch
*VGA server connection using the included DVI-to-VGA adapter
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during the installation and operation of the rackmount console
described in this manual. Read all instructions thoroughly before attempting to install or operate the rackmount console. Failure to comply
will void the warranty and could damage the rackmount console or connected equipment.
WARNING:
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the
life support equipment or to significantly affect its safety or effectiveness is not recommended.
Español p. 5 Français p. 9
Русский
p. 13
• 1U Rackmount Console
• KVM Cable Kit (DVI-I, USB)
• DVI (Female) to VGA (Male) Adapter
• AC Power Cord
• Owner’s Manual
• Mounting Brackets
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
To Next Page
Need help?
General