To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite B097-016 and is the answer not in the manual?
General| Brand | Tripp Lite |
|---|---|
| Model | B097-016 |
| Category | Network Hardware |
| Language | English |
Attach rubber feet or rack-mount kit, connect NET1/NET2 ports, serial devices, and power cables for the console server.
Connect to the console server via default IP 192.168.0.1 or DHCP address using a web browser and default login credentials.
Enhance security by setting a strong, high-entropy password for the root user via the User & Groups menu.
Set the NET1 port's network configuration method to DHCP or Static IP, providing necessary IP and Subnet Mask details.
Activate NET2 for failover/OOB access or as a management LAN gateway by configuring its network interface settings.
Configure NET2 for Out-of-Band management network or IP Passthrough with specific private IP ranges.
Utilize NET2 for a redundant connection by using interface aggregation, bridging NET1 and NET2 network settings.
Set serial port common settings (Baud Rate, Parity) and enable remote access protocols like Telnet or SSH.
Tripp Lite warrants products against defects for four years, covering repair or replacement of defective units.
Register your Tripp Lite product online at www.tripplite.com/warranty for quicker service and a chance to win products.
