User’s Guide
SNMPWEBCARD
Firmware Version 12.04.0048 / 12.04.0049 / 12.04.0051
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright © 2010 Tripp Lite. All trademarks are the sole property of their respective owners.
1. Introduction 2
1.1 System Requirements 2
2. Installation and Configuration 2
2.1 Default UPS System Shutdown Setting 2
2.2 Other Default Settings 3
2.3 SNMP Configuration 3
3. Web Console 3
3.1 Opening the Web Console 3
3.2 Web Console Interface 4
3.3 Status 4
3.4 Actions > Control 6
3.4.1 Actions > Control > Economy Mode 6
3.5 Actions > Loads 7
3.6 Settings > Device 8
3.7 Settings > Events 8
3.8 Settings > Contacts 9
3.9 Settings > Network 10
3.10 Settings > System 13
3.11 Logs > Events 14
3.12 Logs > Data 15
3.13 Help 15
4. Telnet/SSH Console 16
5. Load Ramping and Shedding 17
6. Troubleshooting 18
7. Technical Support 18
Documentation Notice: This User’s Guide is a supplement to the printed manual that came with your SNMPWEBCARD or network-enabled PDU. Refer to the printed manual
for instructions on hardware installation and basic conguration, including IP address assignment. If you have misplaced your printed manual, refer to the electronic version
included on the bundled CD-ROM or download it at www.tripplite.com/support/manuals/.
WARRANTY
REGISTRATION:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
To Next Page
General
Weight and Dimensions
