Tripp Lite B120-000-SL - User Manual

DVI Single Link Active Extender
Model:
B120-000-SL
Package Contents:
• B120-000-SL DVI Single Link Active Extender
• External Power Supply
(Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)
• Screwdriver for Equalization Adjustment
• Owner’s Manual
Installation
Note: Test to make sure that the entire installation works properly before pulling cables through ceilings/walls.
1
Connect the longer DVI-D Single Link cable between the source and the connector on the B120-000-SL labeled “Source.”
Note: For extension distances over 75ft., use 24Awg DVI-D Single Link cable.
2
Connect the external power supply to the B120-000-SL, and then plug it into a Tripp Lite Surge Suppressor, Uninterruptible Power Supply
(UPS), or Power Distribution Unit (PDU). The Green LED will illuminate to indicate that the unit is receiving power.
3
Connect the shorter DVI-D Single Link cable between the monitor and the connector on the B120-000-SL labeled “Display.” The Orange LED
will illuminate to indicate that there is an active signal between the source and the monitor.
Note: The DVI-D Single Link cable connecting the monitor to the B120-000-SL must be no longer than 16 ft. (5 m.).
4
If necessary, use the equalization control to adjust the video image.
Note: An improper Equalization setting can result in no image being displayed at all. If no image is displayed on your monitor, try adjusting the equalization
until an acceptable image is displayed.
Product Features:
• Supports a maximum video resolution of 1920 x 1080 @ 60Hz
• Extend a DVI-D video signal up to 150 ft. from the source
• Built-in Equalization control to adjust the video image
• HDCP compliant
COMPUTER
MONITOR
B120-000-SL
Copyright © 2012 Tripp Lite. All rights reserved.
1
2
3
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Warranty
Registration:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
Owner’s Manual
201203198 93-3128.indd 1 3/26/2012 2:24:21 PM

Tripp Lite B120-000-SL Specifications

General

Model	B120-000-SL
Category	Extender
Connection Method	HDMI
Connector Type	HDMI
Number of Ports	2
Material of Construction	Plastic
Resolution Support	1080p
Video Resolutions	1080p
Operating Temperature	0 to 40 °C
Storage Temperature	-10 to 70 °C
Humidity	0% to 85% RH

Summary

DVI Single Link Active Extender Manual

Package Contents

Lists all items included in the product package, such as the extender, power supply, and screwdriver.

Product Features

Highlights key capabilities like resolution support, extension distance, and HDCP compliance.

Installation Guide

Provides step-by-step instructions for connecting the DVI extender between the computer and monitor.

Warranty Information and Registration

1-Year Limited Warranty Details

Details the terms and conditions of the one-year limited warranty for product defects.

Warranty Registration Process

Instructions on how to register the product warranty online for a chance to win a free product.

WEEE Compliance Information

Information for European Union customers regarding the recycling of electrical and electronic equipment.

Safety and Usage Warnings

Advises against using the equipment in life support applications or with flammable anesthetic mixtures.