To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite B162-100-POE and is the answer not in the manual?
General| Device Type | Extender |
|---|---|
| Max Distance | 100 meters |
| Power over Ethernet (PoE) | Yes |
| Resolution Support | Up to 1080p |
| Weight | 0.5 lbs |
| Connector Type | HDMI |
| Operating Temperature | 0°C to 40°C |
| Certifications | RoHS, CE, FCC |
Steps for installation, connection, and configuration.
Steps for connecting units in point-to-point and multipoint setups.
Steps to log into DVOE Manager and set time.
Steps to assign input sources via drag-and-drop.
Steps to configure and set up a video wall.
How to create a new video wall layout template.
Steps to create a new profile by naming and selecting devices.
Applying a saved profile to video displays.
How to create schedules for profile application.
Accessing and configuring settings for B162-001-POE transmitters.
Accessing and configuring settings for B162-100-POE receivers.
How to perform batch configuration for multiple devices.
Firmware upgrade, backup, and restore functions.
Process for upgrading device firmware.
Exporting transmitter and receiver layouts for backup.
Restoring DVOE Manager settings from a saved file.
How to establish connections and execute CLI commands.
Command to switch input sources on a display.
Command to switch transmission paths.
Command to disable transmission paths.
Command to apply layouts and assign sources to video walls.
Command to stop video output for receivers or video walls.
General safety precautions for product use.
