To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite BC600SINE and is the answer not in the manual?
General| Output Power Capacity | 600 VA / 360 W |
|---|---|
| Output Voltage | 120V |
| Input Voltage | 120V |
| Topology | Line Interactive |
| Outlets | 6 x NEMA 5-15R |
| Communication Ports | USB |
| Output Voltage Regulation (Battery Mode) | ±5% |
| Battery Type | Sealed Lead Acid (SLA) |
| Output Waveform | Pure Sine Wave |
| Output Frequency Regulation (Battery Mode) | 50/60 Hz +/- 0.5 Hz |
Guidelines for installing the UPS in a safe and optimal environment, avoiding hazards.
Instructions on correctly connecting the UPS to power sources and avoiding electrical hazards.
Precautions for connecting equipment to the UPS, especially regarding life support applications.
Safety precautions for handling UPS batteries, including disposal and service.
Steps to connect the UPS unit to a live AC power outlet for initial setup.
Guide on plugging computer and other devices into the UPS receptacles for protection.
Instructions on how to turn the UPS on or off and check its operating status.
How to connect the UPS to a computer via USB for monitoring and software control.
Details on using the ON/OFF button to switch UPS modes and cold-start the unit.
Instructions for silencing alarms and performing self-tests on the UPS.
Descriptions of the status lights on the UPS and their meanings.
Procedures for safely storing the UPS for extended periods to maintain battery health.
Steps for obtaining service, including warranty, troubleshooting, and return procedures.
Information regarding compliance with FCC rules for digital devices.
Guidelines for connecting equipment, particularly for Canadian users.
Details on product identification numbers for regulatory purposes.
