Tripp Lite DMCVW4555X2 - Page 8

8
Assembly
6a
6b
Install the
Adapter Brackets
For Flat
Back Screens
Install the Adapter Brackets
For Recessed Back Screen or to Access A/V Inputs
Note: Choose appropriate screws and spacers according to the type of screens.
• Position the adapter brackets as close as possible to the center of the display.
• Screw the adapter brackets onto the display.
• Repeat procedure for the second display.
Tighten all screws, but do not over-tighten.
Note: Choose appropriate screws, washers and spacers (if necessary) according to the type of screen.
• Position the adapter brackets as close as possible to the center of the display.
• Screw the adapter brackets onto the display.
• Repeat procedure for the second display.
Tighten all screws, but do not over-tighten.
M-A / M-B / M-C
M-F
M-C / M-D / M-E M-D / M-E M-D / M-E
M-C
M-F
or or or
M-F
M-G M-G
M-G
M-H M-H
M-F M-F