Dimensions: [mm] INCHES
Tripp Lite has a policy of continuous improvement. Specications are subject to change without notice.
Copyright © 2009 Tripp Lite.
200904038
1111 W. 35th Street
Chicago, IL 60609 USA
773.869.1234
www.tripplite.com
Mounting Template for Tripp Lite UPS System Models:
INTERNET550U, INTERNET550SER, INTERNET600U and ECO550UPS
Note: This graphic represents actual-sized center-to-center spacing for drilling holes to mount the unit. This portion can be printed and cut out to use as a template for mounting purposes.
In your PDF print setup menu, be sure to turn the Page Scaling feature OFF or set to NONE, to insure proper measurments.
Refer to the full product drawing for measurements of the entire unit in relation to the cut out holes and determine where to place your
template for proper mounting.
CUT HERE
CUT HERE
CUT HERE
CUT HERE
Need help?
General
