Input circuit breaker 10A
UPS Input cord length (ft.) 6
UPS Input cord length (m) 1.8
Recommended Electrical
Service
15A 120V
Phase Single-Phase
BATTERY
Full load runtime (minutes) 3.4 min. (300w)
Half load runtime
(minutes)
9.9 min. (150w)
DC system voltage (VDC) 12
LEDS ALARMS & SWITCHES
LED Indicators 2 LEDs indicate power status and overload/check battery status
Alarms Audible alarm indicates power-failure and overload status
Switches Combination switch controls on/off power status and self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
420
UPS AC suppression
response time
Instantaneous
UPS Dataline suppression 1 line TEL/DSL (1 in / 1 out)
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form factors
supported with included
accessories
Tower; Ultra-compact desktop
Included mounting
accessory description
Wallmount installation supported using keyhole mounting tabs
Primary form factor Desktop
UPS / Power Module
dimensions in primary
form factor (height x width
x depth / inches)
3.1 x 10.8 x 5.7
UPS / Power Module
dimensions in primary
form factor (height x width
x depth / cm)
7.8 x 27.6 x 14.6
UPS / Power Module
weight (lbs)
6.5
UPS / Power Module
weight (kg)
3
UPS Shipping dimensions
(height x width x depth /
inches)
4.1 x 8 x 13
To Next Page
Loading...
