Tripp Lite RELAYIOCARD User Manual

Owner’s Manual
Warranty
Registration:
Register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
Programmable Relay I/O Card
Model: RELAYIOCARD
Copyright © 2008 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
Tripp Lite World Headquarters
1111 W. 35th Street, Chicago, IL 60609 USA
(773) 869-1234 • www.tripplite.com
1. Introduction 2
1.1
Product Features
2
1.2
Package Contents
2
2. Installation and Setup 2
2.1
System Requirements
2
2.2
Communications Setup
2
2.3
Configuration
3
3. Specifications 4
4. Warranty & Warranty Registration 4
Español 5
Français 9
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to
cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
200805102 93-2815.indd 1 7/15/2008 9:18:59 AM

Tripp Lite RELAYIOCARD Specifications

General

Category	Network Card
Type	Relay I/O Card
Interface	RJ45
Compatibility	Compatible with select Tripp Lite UPS systems
Connectivity	Ethernet
Monitoring	Remote monitoring and control
Power Supply	Powered by the UPS system

Summary

Introduction

Product Features

Details the programmable features of the RELAYIOCARD, including relay outputs and shutdown timers.

Package Contents

Lists the items included in the RELAYIOCARD package, such as the card, cables, and manual.

Installation and Setup

System Requirements

Specifies compatible Tripp Lite UPS systems and required protocol versions for the RELAYIOCARD.

Communications Setup

Provides instructions for connecting the RELAYIOCARD via RS-232 and configuring communication parameters.

Configuration

Guides users through configuring relay outputs, input signals, and relay open/close settings.

Specifications

Warranty & Warranty Registration