To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite TLP1210SATG and is the answer not in the manual?
General| Type | Surge Protector |
|---|---|
| Number of Outlets | 12 |
| Material of Construction | Metal |
| Input Voltage | 120V AC |
| Output Voltage | 120V AC |
| Agency Approvals | cUL, UL |
| Green Compliant | Yes |
| RoHS | Yes |
| Warranty | Lifetime |
| Plug Type | NEMA 5-15P |
| Receptacle Type | NEMA 5-15R |
| Filtering | EMI/RFI Noise Filtering |
| Mounting | Wall Mountable |
| Surge Protection Rating | 2880 Joules |
| Cord Length | 10 feet |
| Overload Protection | 15A Circuit Breaker |
| Response Time | 1 ns |
Allows one 'Master' device to control power for up to eight peripheral devices.
Outlets that have power cut by the 'Master' device when idle or turned off.
Outlets that provide continuous power even in GREEN power-saving mode.
Switch to designate higher-wattage (25W) or lower-wattage (15W) devices as 'Master'.
Allows user to choose between GREEN power-saving mode (Auto) or standard protection (Manual).
Plugging the surge suppressor's power cord into a standard 3-wire grounded 120V AC outlet.
Plugging equipment into surge suppressor outlets, avoiding extension cords and overload.
