Tripp Lite U339-E02 - System Requirements; Feature Identification

3
Feature Identification
System Requirements
A
2.5”/3.5” SATA HDD/SSD
Drive Bays
B
Power LED
C
HDD/SSD Drive Bay LEDs
D
Erase Button
E
Erase Process LEDs
F
USB 3.0 Type-B Port
G
On/Off Switch
H
DC-In Input
• (x2) 2.5” or 3.5” SATA Hard Drives
• Computer with an available USB port
Notes:
• A USB 3.0 port is required to achieve speeds up to 5 Gbps.
• The offline erase function will not work if the U339-E02 is connected
to a computer or any other source via USB cable.
USB 3.0 ON/OFF 12V 3A
A
A
B
C
C
D
E
F G H