How to fix no or bad signal on Tristan Auron Control Unit?
If your Tristan Auron Control Unit shows no or a bad signal, it might be due to the aerial not being properly pointed. Try adjusting the aerial and check the cable. If the issue persists, consider having your aerial and installation professionally tested.
What to do if Tristan Auron Control Unit antenna cable is short-circuited?
If the antenna cable of your Tristan Auron Control Unit is short-circuited, it may be due to a shortened antenna cable, an internally shortened antenna, or damage/alien substances in the port. Try replacing the antenna. If there's an alien substance, remove it. If damaged, contact your local service center.
Why is channel scrambled or not available on Tristan Auron Control Unit?
If a channel on your Tristan Auron Control Unit is scrambled or unavailable, it could be due to several reasons. The channel might have signal but no audio or video because it is not currently on air. Alternatively, the channel may have been deleted by the broadcasting company or is used for data broadcasting, meaning it cannot be watched in the usual way.
General| Brand | Tristan Auron |
|---|---|
| Model | DT2420 |
| Category | Control Unit |
| Language | English |
To Next Page