To Next PageTo Next PageWhy is my TriStar AC-5474 Air Conditioner not cooling enough?
If your TriStar Air Conditioner isn't cooling enough, ensure that all doors and windows are closed, remove any heat sources from the room, check that the hot air exhaust hose is properly connected and not blocked, verify that the temperature setting isn't too high, and make sure the air inlet is not blocked, cleaning it if necessary.
What to do if my TriStar AC-5474 Air Conditioner shows E2 code?
If your TriStar Air Conditioner displays the E2 code, it means the water tank is full. Please empty the water tank to resolve this issue.
How to fix a TriStar AC-5474 Air Conditioner that won't start?
If the TriStar Air Conditioner unit does not start, it could be due to a few reasons: * The water full indicator lamp might be blinking because the water tank is full. In this case, drain the water out of the water tank. * If you are in electric heating mode, the room temperature might be higher than the setting temperature. Adjust the temperature accordingly. * If you are in cooling mode, the room temperature might be lower than the setting temperature. Adjust the temperature in this case.
Why is my TriStar AC-5474 Air Conditioner so noisy?
If your TriStar Air Conditioner is noisy, make sure it is placed on a flat, level ground. Also, the sound may be from the flowing of the refrigerant inside the air conditioner.
What to do if TriStar Air Conditioner auto power-off in heating mode?
If the TriStar Air Conditioner automatically powers off in heating mode, it is due to the heating protection feature. When the temperature at the air outlet exceeds 70 degrees, the unit will power off automatically. Allow the room temperature to cool before restarting the unit.
What does E0 code mean on a TriStar AC-5474?
If your TriStar Air Conditioner displays an E0 code, it indicates that the room temperature sensor has failed. Replace the room temperature sensor.
Details the functions of the power, temperature, mode, fan speed, and timer buttons on the unit's control panel.
Explains the operation of temperature, mode, fan speed, timer, and power buttons on the remote.
Instructions for operating the air conditioner in cooling mode.
Steps for using the dehumidifying function of the air conditioner.
Details on setting the timer for ON and OFF functions.
Information regarding the drainage of collected water.
Guidance on connecting the unit's wiring to local electrical safety standards.
Instructions for correctly installing the hot-air exhaust hose.
Steps for fitting and securing the window slider kit.
General| Type | Monobloc mobile air conditioner |
|---|---|
| Timer | Yes |
| Timer type | Digital |
| Hose length | 1.5 m |
| Noise level | 65 dB |
| Water tank capacity | 0.5 L |
| Refrigerating medium | R290 |
| Airflow (medium speed) | 320 m³/h |
| Cooling capacity (max) | 5000 BTU/h |
| Dehumidifying capacity | 0.8 l/h |
| Timer duration (maximum) | 24 h |
| Air conditioner functions | Cooling, Dehumidifying, Fan |
| Cooling temperature range | 16 - 31 °C |
| Refrigerating medium weight | 100 g |
| Suitable for room volume up to | 40 m³ |
| Cooling capacity in watts (max) | 1460 W |
| Cooling capacity in watts (nominal) | - W |
| Cooling energy efficiency (EER, W/W) | - |
| Connected load | 561 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Energy efficiency class (cooling) | A |
| Hourly energy consumption (cooling) | - kWh |
| Product color | White |
Weight and Dimensions| Depth | - mm |
|---|---|
| Weight | - g |
