What to do if my TriStar Blender is beeping and not working?
If your TriStar Blender is beeping and not working, it could be due to several reasons: * The jug may not be properly fitted onto the base. Ensure it's securely in place. * The lid might not be fitted correctly. Make sure the marks on the lid and the jug align. * There might not be enough liquid in the jug. Add more liquid. * There could be spills around the overflow sensor.
Why did my TriStar BL-4433 Blender stop mid-program?
Your TriStar Blender may have stopped mid-program for the following reasons: * The lid may be loose. Ensure the marks on the lid and jug align. * The liquid level may be too low due to evaporation during cooking. Add liquid through the refill hole. * There may be too much liquid, exceeding the maximum level. Pour out some liquid. * The jug may have become loose from the base. Press on the jug to resume the process.
How to fix large ingredient pieces after blending with the TriStar BL-4433 Blender?
If ingredients remain too large after the blending cycle with your TriStar Blender, consider these solutions: * The initial pieces might have been too large. Use the blend function after the cooking program. * The wrong function might have been selected. Try another function. * Insufficient water may have been added. Add sufficient water.
Why are the ingredients still hard after cooking in my TriStar BL-4433?
If the ingredients are still hard after the cooking cycle in your TriStar Blender, consider the following: * Chop the ingredients into smaller pieces before adding them. * The wrong function may have been selected. Try another one. * There may be too much water or food, or the filter might be clogged. Try again with different amounts. * Some foods require longer cooking times. Select the reheat function until the food is fully cooked.
Why is my TriStar Blender soup not hot and the cycle finished early?
If your TriStar Blender soup is not hot and the cooking cycle finished early, it could be because there was too much hot liquid in the jug. Pour out a little amount and choose the reheat function.
Chop ingredients, add to jug, ensure levels are correct. Smooth soup takes 20 min, chunky 25 min.
Pour water between MIN/MAX, use egg tray for food. Takes 15 min. Caution with hot jug.
Pour water between MIN/MAX, use egg tray for food. Takes 15 min. Caution with hot jug.
Reheat previously prepared soup. Volume between MIN/MAX. Process: Heating-Mixing cycle.
Use as blender. Smoothie function stops automatically after 2min 40sec.
The packaging is 100% recyclable, return the packaging separated.
Device equipped with WEEE mark, ensuring correct processing to prevent environmental harm.
Appliance designed for food contact, complies with Low Voltage, EMC, and other directives.
General| Blade Material | Stainless steel |
|---|---|
| Pulse Function | Yes |
| Material | Plastic |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Capacity | 1.5 L |
To Next Page
