EasyManua.ls Logo

TriStar BR-1017 - Parts Description; How to Use; Before the First Use

TriStar BR-1017
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
1
4
578
9 6
2
3
PARTS DESCRIPTION
1. Bun warmer
2. Slot
3. Lift handle
4. Crumb tray
5. ‘+’ Function
6. Defrost button
7. Cancel button
8. ‘-‘ Function
9. Reheat button
HOW TO USE
Remove all packaging of the device.
Check if the voltage of the appliance corresponds to the main voltage
of your home. Rated voltage : AC220-240V 50Hz.
Place the device on a at stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet neither for outside use.
BEFORE THE FIRST USE
Before toasting for the rst time, preheat the appliance without inserting
any bread. This will disperse some smoke and a bad smell, this is normal
and not dangerous for your health.
USE
1. Place the bread slices in the slot and turn the time controller to the
preferred position (from level 1 till level 7 for light to deep toasting).
2. We advice to start halfway in position 4 for medium toasting. After some
use you will automatically choose the toasting level you prefer.*
3. Push the lift handle down, when the toasting level is reached the bread
slice will automatically be ejected.
4. The lift handle which lowers the bread will only stay down when the
power is on.
5. If you wish to interrupt the toasting untimely, press the cancel button.
6. You can use the defrost” button to defrost your bread without toasting it.
7. The “reheat button can be used to reheat already toasted bread
without browning it.
8. The toaster is equipped with the with a bun warmer, this rack can be
used for warming up buns and baguettes.
*
Menu Time in seconds
1 60
2 90
3 120
4 150
5 180
6 210
7 240
Instruction manual

Related product manuals