What to do if the TriTherma MQD-8 Heat Pump compressor overheats?
If the TriTherma Heat Pump compressor overheats, refer to the function book for the meaning of fault code E1. Alternatively, wait for the outdoor unit LED light to flash one time with an interval of 5 seconds.
What should I do if my TriTherma Heat Pump shows a Coil over heating protection error?
If your TriTherma Heat Pump shows a coil over heating protection error, check the function book for the meaning of fault code E8. Another option is to wait for the outdoor unit LED light to flash 4 times with an interval of 5 seconds.
What should I do if my TriTherma MQD-8 Heat Pump displays an Over current protection error?
If your TriTherma Heat Pump displays an over current protection error, check the function book for the meaning of fault code P4. The specific solution might depend on the outdoor unit.
What should I do if my TriTherma MQD-8 displays a Low pressure protection error?
If your TriTherma Heat Pump displays a low pressure protection error, check the function book for the meaning of fault code P2. You can also wait for the outdoor unit LED light to flash 7 times with an interval of 5 seconds.
What should I do if my TriTherma Heat Pump displays an Outdoor wrong phase error?
If your TriTherma Heat Pump displays an outdoor wrong phase error, check the function book for the meaning of fault code P8. You can also wait for the outdoor unit LED light to flash 9 times with an interval of 5 seconds.
What to do if the TriTherma MQD-8 has an ambient temp. sensor Error?
If the TriTherma Heat Pump has an ambient temp. sensor Error, check the function book for the meaning of fault code E2. Alternatively, wait for the outdoor unit LED light to flash 2 times with an interval of 5 seconds.
What to do if the TriTherma MQD-8 has a Pipe temp. sensor Error?
If the TriTherma Heat Pump has a Pipe temp. sensor Error, check the function book for the meaning of fault code E3. Alternatively, wait for the outdoor unit LED light to flash 3 times with an interval of 5 seconds.
What happens when the TriTherma MQD-8 Heat Pump's Return water temp. sensor fails?
When the TriTherma Heat Pump's Return water temp. sensor fails, the compressor will stop.
What happens when there is an AC Antifreeze protect issue with my TriTherma MQD-8 Heat Pump?
If there is an AC Antifreeze protect issue with your TriTherma Heat Pump, the compressor will stop.
What happens when the TriTherma MQD-8's AC out water temp. sensor malfunctions?
When the TriTherma Heat Pump's AC out water temp. sensor malfunctions, the compressor will stop.
To Next Page
General