Triton TTS 1400 User Manual

4
GB
Technical Abbreviations Key
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Wear protective shoes
Wear protective clothing
Be aware of kickback!
Warning: Sharp blades or teeth!
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
WARNING: Moving parts can cause crush and cut injuries
Caution!
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Conforms to relevant legislation and safety standards.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Specification
Model no: TTS1400
Voltage: 120V~ 60Hz
Power: 12A
No load speed: 2000 – 5000min
-1
Bevel adjustment: 0° - 48°
Max depth of cut @ 90°: 54mm (2-
1
⁄8")
Max depth of cut @ 45°: 38mm (1-
1
⁄2")
Blade dimensions:
Ø165mm (Ø6-½") x 20mm
Protection class:
Ingress protection: IP20
Weight: 5.5kg (12lbs)
As part of our ongoing product development, specifications of Triton products may
alter without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection,
stop using the tool immediately and check the ear protection is correctly fitted and
provides the correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition.
If necessary, limit the length of time exposed to vibration and use anti-vibration
gloves. Do not operate the tool with hands below a normal comfortable temperature,
as vibration will have a greater effect. Use the figures provided in the specification
relating to vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to international
standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may
produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods of time.
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.
Original Instructions
Introduction
V Volts
~, AC Alternating current
A, mA Ampere, milli-Amp
n
0
No load speed
Ø Diameter
° Degrees
Hz Hertz
W, kW Watt, kilowatt
/min or
min
-1
(revolutions or
reciprocation) per minute
dB (A) Decibel – A weighted
m/s
2
Vibration magnitude
174376_Manual.indd 4 25/09/2017 17:22

Triton TTS 1400 Specifications

General

Brand	Triton
Model	TTS 1400
Category	Saw
Language	English