Triumph 700T User Manual

10
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY STE P 3
A
B
C
D
E
F
WASHER (C)
Qty: 4
BOLT (A)
Qty: 4
SPRING WASHER (B)
Qty: 4
HARDWARE BAG 3 CONTENTS :
Open HARDWARE BAG 3.
Attach the CONSOLE to the
UPRIGHT MAST using 2 BOLTS
(A), and 2 SPRING WASHERS
(B) and 2 WASHERS (C) on the
inside of the console mast.
Attach the CONSOLE to the
UPRIGHT MAST using 2 BOLTS
(A), and 2 SPRING WASHERS (B)
and 2 WASHERS (C) on the front
of the console mast.
Snap WATER BOTTLE POCKET into
place
Connect the CONSOLE CABLES
and carefully tuck wires in MAST
to avoid damage. Note: Do not
pinch console cable. Be sure the
console cable prongs are aligned
and the ends are tightly seated
into each other.
Attach CONSOLE CABLE COVER.
* NOTE: Be careful not to pinch any
wires while assembling the masts.
WASHERS (C)
SPRING WASHERS (B)
BOLTS (A)
CONSOLE
UPRIGHT
MAST
WATER BOTTLE POCKET
CONSOLE CABLE
COVER

Triumph 700T Specifications

General

Brand	Triumph
Model	700T
Category	Treadmill
Language	English