1026
Diagnostics and Testing
System Diagnostics
The ABS system has an on-board diagnostics feature which allows service technicians to
retrieve stored data from the ECM using Triumph diagnostic software. Full details of the
Triumph diagnostic software operation and how to interpret the results are given
in the Triumph Diagnostic Tool User Guide.
The software is connected, via an interface cable, to the motorcycle using a dedicated
diagnostic plug situated beneath the left hand side panel. By using a dedicated plug, no
electrical connectors associated with the system are disturbed, reducing potential
connector damage.
The software allows the user to retrieve data associated with the system sensors and
actuators, test various component functions, read build data and make minor
adjustments to the set-up of the system. The data and tests available are described on
the following pages.
Diagnostic Tool Connection
1. To connect the Triumph diagnostic interface to the motorcycle, remove the rider's
seat (see Seat - Removal) and release the diagnostic connector from its locating
tang.
1. Diagnostic connector
To Next Page
Loading...
