1029
Diagnostic Trouble Codes
Diagnostic Trouble Codes (DTCs) are logged in the ABS ECM memory when there is a
confirmed fault in the system.
The codes are reported to the Triumph diagnostic tool as a four digit code.
DTCs can be removed at any time using the Triumph diagnostic tool.
The system will log the diagnostic trouble codes listed below:
Diagnostic Trouble
Code (DTC)
Pinpoint test Page Number
Front wheel sensor short
circuit to ground or open
circuit
Front Wheel Sensor Open
Circuit/Short Circuit
Front wheel sensor incorrect
or missing signal
Front Wheel Sensor
Abnormal Input/Losing
Contact
Rear wheel sensor short circuit
to ground or open circuit
Rear Wheel Sensor Open
Circuit/Short Circuit
Rear wheel sensor incorrect or
missing signal
Rear Wheel Sensor
Abnormal Input/Losing
Contact
Front wheel pulser ring
missing teeth
Front Wheel Pulser Ring
Missing Teeth
Rear wheel pulser ring missing
teeth
Rear Wheel Pulser Ring
Missing Teeth
Front wheel input solenoid
short circuit to ground or open
circuit
Front and Rear Input/Output
Solenoid Open/Short Circuit
Front wheel output solenoid
short circuit to ground or open
circuit
Front and Rear Input/Output
Solenoid Open/Short Circuit
Rear wheel input solenoid
short circuit to ground or open
circuit
Front and Rear Input/Output
Solenoid Open/Short Circuit
Rear wheel output solenoid
short circuit to ground or open
circuit
Front and Rear Input/Output
Solenoid Open/Short Circuit