Triumph Rocket 3 GT 2021 - Page 1096

1058
C1690, C1691, C1692-ABS Modulator Malfunction
Fault
Code
Possible cause
Action
C1690
Modulator - active pressure control
malfunction
Contact Triumph service
C1691
Modulator input (master cylinder)
pressure sensor malfunction
C1692
Modulator output (wheel) pressure
sensor malfunction
Removal and Installation - Front Brake Components
Front Brake Pads – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Do not allow a brake component to hang unsupported on the brake hose or line.
Brake hoses or lines that are not supported may become damaged or bent.
Bent or damaged brake hoses or lines lead to reduced braking efficiency causing loss
of motorcycle control and an accident.