Triumph Rocket 3 GT 2021 - Page 1098

1060
3. Repeat for the other brake pad.
NOTICE
Note the position and orientation of the anti-rattle spring for installation.
1. Anti-rattle spring
2. Arrow (orientation mark)
4. Complete the assembly of the brake pads to one caliper (see Front Brake Pads -
Installation) before removing the pads from the other caliper.
Front Brake Pads – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.