Triumph Rocket 3 GT 2021 - Page 1107

1069
7. Make sure the orientation of the brake hoses are as noted for removal and tighten
the union bolt to 25 Nm.
1. Brake hose fixing
2. Sealing washers
3. Fixings
8. Fill the master cylinder with new, DOT 4 brake fluid from a sealed container.
9. Bleed the front brake calipers (see Bleeding the Front Brakes).
NOTICE
When the brake calipers are fitted, there must be a minimum gap of 0.3 mm between
the caliper and brake disc.