Triumph Rocket 3 GT 2021 - Page 1113

1075
NOTICE
The service tool T3880636 is required to remove the front brake lever pivot sleeve.
T3880636 - Kit, Brake Lever Pivot Sleeve
1. Mandrel
2. Extractor
3. Installer piece
4. Support piece
When removing the brake lever pivot sleeve, always wear overalls, eye, face and hand
protection. The brake lever sleeve is hardened and liable to splinter if broken. Debris
from broken components could cause injury to eyes, face and any unprotected parts
of the body.
1. Remove the lock nut from the lever pivot bolt.
2. Remove the lever pivot bolt.
3. Release the lever from the master cylinder assembly and remove the dust seal.