1083
Front Brake Master Cylinder-Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
To prevent paint damage, do not spill brake fluid onto any area of the bodywork.
Spilled brake fluid will damage paintwork.
One of the brake calipers will require removing and the pistons pushed out to back
bleed the master cylinder as part of the brake bleeding procedure, see Bleeding the
Front Brakes.
1. Remove the caliper mounting bolts and slide the caliper off the brake disc.
1. Caliper mounting bolts
2. Caliper
To Next Page