Triumph Rocket 3 GT 2021 - Page 1124

1086
Front Brake Master Cylinder-Disassembly
The following items can be replaced on the front brake master cylinder:
• Brake lever (see Front Brake Lever - Removal)
• Bleed screw
• Brake fluid reservoir
Bleed Screw
NOTICE
The bleed screw within the master cylinder does not have a drilling through it and
does not require a bleed tube.
1. Release the fixings and remove the reservoir cap, reservoir cover and diaphragm seal.
2. Remove the bleed screw from the reservoir mounting fixing.
1. Bleed screw
2. Fixing
3. Brake fluid reservoir