Triumph Rocket 3 GT 2021 - Page 1145

1107
6. Release the fixings, remove the brake disc and collect the wavy and flat washers.
Discard the fixings.
1. Fixings
2. Brake disc
Rear Brake Disc – Installation
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
1. Fit the wavy washers to the new fixings, fit the fixings to the brake disc then fit the
flat washers to the fixings.